Ulefone Be Touch Benchmarks


ulefone be touch hands on

Ahead of the weekend we received the Ulefone Be Touch, and while you guys wait for the full review we thought you might like to see the benchmarks from this flagship smartphone to keep you going.

The Ulefone Be Touch is an exciting device! It’s the first of the ‘big 3’ flagships we have been waiting to review, and it’s a phone that really takes your breath away when you get it in your hands. We simply were not expecting the Be Touch to feel so well made! Anyway more of the build in the full review this weekend, for now let’s take a look at the benchmarks.

A 64bit Mediatek MT6752 processor is at the center of this flagship. The processor also gets the benefit of 3GB RAM and only has to handle the pixels of a 720HD display rather than a FHD panel which should give it a head start over the Elephone P7000.

UleFone Be Touch Benchmarks

  • Antutu: 43,412
  • Ice Storm Extreme: 6,745
  • Nenamark 2: 72.0fps
  • Geekbench Single-core: 800
  • Geekbench multi-core: 3455
  • Vellamo Metal: 1291
  • Vellamo Mulitcore: 1884
  • Vellamo Browser: 3401
  • GFX Manhattan: 715.1
  • GFX Manhattan offscreen: 370.5
  • GFX T-Rex: 1,142
  • GFX T-Rex Offscreen: 702.9
  • Quadrant: 16,411

Ulefone Be Touch Benchmarks – Conclusion

I’m currently running the Be Touch on Android 5.0 using the latest build which was updated via OTA last week. The system on my phone is smooth, nippy and so far stable, but Yash has reported that his version of the phone is a little on the slow side (although I am not sure he is on the same build as me).

Most recently I personally reviewed the Asus Zenfone 2 and I can see that in certain benchmarks the Ulefone Be Touch out performs the Intel powered 4GB RAM phone. The Be Touch does better in Antutu, Geekbench and Quadrant. However, when the phone is required to get the GPU going we see the Zenfone is miles ahead in graphical performance scoring 18328 on its FHD panel compared to just 6745 on the HD Be Touch screen.

For an MT6752 phone though the benchmarks are about spot on. Similar to the Mlais M52 which also has a 720p display, the Ulefone Be Touch gets 6,745 in 3D Mark Extreme (the M52 managed 6840). That said we reviewed the M52 on Kitkat so we were hoping that the Lollipop build of the Be Touch would bring a little extra to the table.

We’ll look out for more OTA update from Ulefone which might get a little extra from the phone. In the meantime what do you think of the Ulefone Be Touch Benchmarks? Keep posted for the full review this weekend.

The Be Touch is available on Geekbuying now for $199.99.

[ Ulefone ]
Previous In the U.S? Well you will soon be able to buy the Asus Zenfone 2 from $199!
Next JiaYu S3 spotted running Android 5.0 Lollipop!

51 Comments

  1. hans
    May 18, 2015

    GPS, please more info on how GPS works on this new phones

    • balcobomber25
      May 19, 2015

      So far with the new 64 bit chips GPS has been excellent, I would expect the same from this one.

  2. joe mont
    May 18, 2015

    I remember reading that the buttons on the last ulefone were wobbly and broke easily, is there anything like that that sticks out?

  3. Yasin
    May 18, 2015

    Avoid this brand, they release every week a flagship phone. And they never update their phone with new software. The screen resolution is slow that’s why its getting higher score.

    • Paap Mrittu
      May 19, 2015

      Are you talking about Elephone or Ulefone?

      • Yasin
        May 21, 2015

        my mistake i was talking about the Elephone.. but this news is about Ulefone. Thanks for clearing it up

    • balcobomber25
      May 19, 2015

      How can a screen resolution be slow? Perhaps you meant low? 720p isn’t the best but it’s not the worst either, it’s just about the middle for displays.

    • Adam Irvine
      May 19, 2015

      Ye you obviously work for a rival company…

      Slow resolution, ha!

  4. Josef Izchaki
    May 19, 2015

    andi what’s the battery like?

  5. Paap Mrittu
    May 19, 2015

    I hope mali t760mp2 is enough for 720p. It should be.

    • balcobomber25
      May 19, 2015

      It’s been enough for 1080p displays there will be no problem with 720p.

      • Paap Mrittu
        May 19, 2015

        Yes, the prime example is Jiayu s3. Either this or Jiayu s3 for me.

        • Lazar Prodanovic
          May 19, 2015

          Would actually go with Jaiyu S3 if I whose you for numerous reasons.

          • Paap Mrittu
            May 19, 2015

            The design n build quality are superior than those of jiayu s3. Speaker is on the bottom rather than backside. on the other hand, s3 has 1080p screen, led notification, more sensors, better camera(i guess), better developer support n cheaper also. Do you want to add something?

            • Lazar Prodanovic
              May 19, 2015

              Yes.
              You just think this have a better build quality because it so appears on external layout because materials used should be more durable, wile you don’t really know what is used inside for peripheral components. I have bunch of old plastic smartphones, never bricked a single one. S3 have a stereo speakers. You know Jaiyu is proven & quality brand, you also know everything is working as it should on S3, no miss functioning in sensor area or falling apart after period of time it’s present on market. Developer suport will also make it a long lasting one. Think all of this makes it a better & secure choice. Only problem with S3 Is a slow charging.

              P’s I am not working for Jaiyu. ???

            • Paap Mrittu
              May 19, 2015

              Let’s wait for the review then. 🙂

            • Thomas Müller
              May 19, 2015

              My Review:
              Quaility: really good.
              Soundspeaker: bad
              GPS: takes 30 seconds
              Performance: good
              Screen: ok für 720P
              Finerprint: works not always
              Camera: like a average 5 MP cam (ghosting and to soft in the edge)

            • Paap Mrittu
              May 19, 2015

              Speaker is also bad along with camera? 🙁

            • miya
              May 21, 2015

              Have you received it? Fingerprint only need 0.1S,
              SO FAST!

            • balcobomber25
              May 19, 2015

              “I have bunch of old plastic smartphones, never bricked a single one.”

              What does the material of the phone have to do withing bricking it? A bricked phone has nothing to do with what the phone is made of.

            • Lazar Prodanovic
              May 19, 2015

              Point actually whose to show how it hasn’t have much with it.

            • balcobomber25
              May 19, 2015

              Phones become bricked from flashing ROMs or rooting (among other Software related things). They can also become bricked from hardware malfunctions it has nothing to do with what your phone is made of. It can be made of titanium alloy and still become bricked.

            • Lazar Prodanovic
              May 20, 2015

              I think it’s obvious I ment physically broken but I also ment & various hardware malfunctioning like any out of SoC external components. So I used term bricked. Big deal.
              Now now you are a big boy so you know root don’t have nothing to do with people flashing bullshits. You also know how their is more than one line of security off bad flashes from recovery that is on separate partition with separate kernel to ADB.
              I don’t consider boot loop’s & various other software problems in “bricked” category as they are repairable in 99% of case’s including & eMC partition table corruptions. Who’s & repair service guy as I whose & kernel developer. We just use terminology different.

            • balcobomber25
              May 20, 2015

              It wasn’t obvious what you meant at all. In the phone community the term “bricked” has an actual meaning. Whether you consider something bricked or not, it is still a term that is used industry wide. And the build material has nothing to do with it.

            • Android Hound
              May 22, 2015

              I don’t think so. ulefone is big manufacturer in China. They have focused on OEM service in the past 10 years. I think quality is OK.

  6. Paap Mrittu
    May 19, 2015

    Battery test conducted by s7yler. http://browser.primatelabs.com/battery3/60070

    • balcobomber25
      May 19, 2015

      This has an HD display (720p) the S3 has an FHD display (1080p). 720p uses a lot less battery.

  7. Manos
    May 19, 2015

    My ZenFone 2 is the 2.3GHz model and gets 47100 antutu…The 1.8GHz is not that good

    • Kostas Karipas
      May 30, 2015

      hi i have a jiayu s3 with 2gb… last week a problem appered.. when i make or recieve a call (viber skyper everywere..) the other person can’t hear me…
      but when i record a video sound is ok…
      i have done everything to put a NEW rom from Needrom.com.
      but pc don’t find my phone …
      any suggestions??? i leave in greece

  8. eddy
    May 19, 2015

    the black border on the bottom on screen is to much

  9. Thomas Müller
    May 19, 2015

    I think the camera is F/2.8 not F/2.0. The taken photos are not the best, or?

    • Paap Mrittu
      May 19, 2015

      Adverised spec was F/2.2. Do you have the phone already?

      • Thomas Müller
        May 19, 2015

        a friend of mine. The taken photos Shows F/2.8 under the properties. Sorry but the camera can’t mess with an iphone 4,5 oder 6 in my opionion.

        • balcobomber25
          May 19, 2015

          Iphone 4, 5 and 6 all costs 4x as much as this when they were brand new. Those Iphone camera’s however don’t come close to the Vivo Xshot or even the Meizu MX4.

        • Paap Mrittu
          May 19, 2015

          As I have learned that f/2.8 has nothing to do with the sharpness. But a lower f stop lens will perform worse in low light.

  10. Paap Mrittu
    May 19, 2015

    This antutu test shows it score almost 48000!

  11. Jan Horák
    May 19, 2015

    why your antutu results show 43 000, and screenshot at geekbuying (http://image1.geekbuying.com/content_pic/201505/20150513180330239.jpg ) shows only 34 000 points?

    • Xalis
      May 19, 2015

      Most likely power saving mode on, that limits the CPU frequency.

    • miya
      May 21, 2015

      I’ve seen running video, it wouldn’t be so low, I need to test it,and Be touch is really nice ,i like the front fingerprint sensor.

    • Android Hound
      May 21, 2015

      I think this not final

  12. guest
    May 19, 2015

    this is from youtube

    • Paap Mrittu
      May 19, 2015

      The video s from gadget.letnick, right? First video I have seen on be touch and straight away impressed by the build quality and aesthetics.

  13. Captain Cook
    May 21, 2015

    O.M.G. 48490? More than oneplus one

  14. Android Hound
    May 21, 2015

    Best Touch ID. I think i will buy it. hahhhh

  15. martin95
    May 21, 2015

    I like this machine design, and press the fingerprint before unlock strong experience. I couldn’t wait to get this machine