Redmi Note 9 series appears on TENAA – get a glimpse of what they look like

Redmi Note 9 series
Redmi Note 9 high version

In recent times, there have been multiple reports regarding the upcoming Redmi Note 9 series. Many people are confused because Redmi already released the Note 9 series globally back in May. However, the company did not release these devices in China at the time. Now, Redmi is getting set to unveil the Redmi Note 9 series in China and it comes with significant changes. From the design to the hardware, this device is different from the global version.

Redmi Note 9 series

Now, we have a glimpse of what the Redmi Note 9 series looks like from its appearance on TENAA. In terms of design and front camera placement, all the leaks from @DigitalChatStation are correct. Furthermore, these smartphones adopt a circular rear camera design as against the rectangular design on the global version. While the regular model has the LED flash inside the circle, the high version has the LED flash outside the circle. Also, the four-camera sensors in the high version sit inside a square in the overall circular design of the rear camera.

Redmi Note 9 regular model

Redmi Note 9 series specifications

According to leaks, this series will have two smartphones, a regular model and a high version. According to @DigitalChatStation, the regular version of this series will come with a 6.53-inch display which has a 2400 x 1080p resolution. The display will have a single punch-hole screen in the upper left corner. We will also have a 13MP front camera as well as a 48MP main rear sensor in a Cantonese matrix triple camera setup. This device will come with a Dimensity 800U processor as well as a 5000 mAh battery that supports a 22.5W fast charge.  The Redmi Note 9 regular version will have a dimension of 161.96 × 77.25 × 9.20mmm weighing 200g. ​​​​

Redmi Note 9 series
Redmi Note 9 high version

As for the Redmi Note 9 high version, here are what we should expect

  • Display: 6.67-inch micro-curved LCD display with a 2400 x 1080p resolution and a single punch-hole (center). Uses a 120Hz refresh rate + 240Hz sampling rate
  • Support 30 ~ 120Hz multi-speed transmission.
  • Front Camera: 16MP front camera
  • Rear Camera: Quad camera setup, 108mp HM2 main sensor
  • Processor: Snapdragon 750G SoC
  • Battery: 4820 mAh + 33W fast charge
  • Dimension: 165.4 × 76.8 × 9.0mm
  • Weight: 214.5g. ​​

Redmi Note9 series display panel leak shows a very small punch-hole

According to previous reports, the punch-hole aperture of this device is almost equal to the mainstream flagship devices. The punch-hole aperture will be 3.8mm±. The leak also claims that next year, the apertures of flagship punch-hole will be mostly 2.4mm±~2.9mm±. With a small diameter lens module and 0.7μm cis, selfies will not be a problem.

Recently, two new products of the Redmi Note 9 series officially obtained 3C certification. Judging from the network access information, the two new models of the Redmi Note series should correspond to two versions of the same model, namely the standard version and the Pro version. In addition, the Pro version will support 33W fast charging.

Redmi Note 9 series

This Redmi Note 9 high version (probably Redmi Note 9 Pro) will be the first smartphone to use the Snapdragon 750G processor in China. The 100-megapixel Samsung HM2 sensor is 1/1.52 inches in size, with a unit pixel area of ​​0.7μm, and supports 9 pixels in one (equivalent to 2.1μm). It is worth mentioning that Redmi previously released the Note 9/Pro series outside China. However, the Chinese version will be very different from the global version.

Previous Sony PlayStation 5 is caught overheated in a retail store
Next The popular Samsung Galaxy M31 has received One UI 2.5 update

1 Comment

  1. Krish Saxena
    November 7, 2020

    I hope they launch this in India as well. The MediaTek Dimensity chipset is a pretty good addition